| Customization: | Available |
|---|---|
| After-sales Service: | Remote Video Guidance |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The equipment is made of two rolls forming spiral channels.Two kinds of heat transfer media can flow in full countercurrent, which greatly enhances the heat transfer effect, Even small temperature difference can achieve ideal heat transfer.
The nozzle of tangential structure with Low resistance, Due to helical channel are average curvature, There is no big liquid flow, Therefore, the design flow rate can be increased so it has high heat transfer capacity.
Type I Non detachableSpiral plateHeat exchanger's helical channel are welded and sealed, so it has high sealing performance.
Type II detachableSpiral plateHeat exchanger's Structure principle similar to above,But one of the channel can be disassembled and cleaned, especially for heat exchange with viscous and precipitated liquid.
Type III detachableSpiral plateHeat exchanger's Structure principle similar to above,But two channels can be disassembled and cleaned,ranges aremore extensive.
The nominal pressure PN of spirotal heat exchanger equipment is 0.6, 1, 1.6 and 2.5MPa (refers to the maximum working pressure of single channel) , material can be divided into carbon steel and stainless steel.Customers can choose according to the actual process
When a single device cannot meet the requirements, multiple devices can be used in combination, but the combination must conform to the following provisions: parallel combination, series combination, equipment and channel spacing is the same. Hybrid combination: one channel in parallel, one channel in series
Nominal pressure PG is 0.6, 1.0, 1.6MPa.
The allowable working temperature of carbon steel is -20°C~250°C;
Stainless steel is -20°C~320°C.
When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam condensation can only be cubic. For caustic soda industry, integral heat treatment is required to eliminate stress.
Parameters and installation designation of stainless steel non-detachable spiral plate heat exchangers;Heat exchange area (square meters) model channel distance (mm) calculation heat exchange area (square meters) flow rate (1m/s) handling capacity (mm) plate width H(m) OD DN (mm) H1(mm)L(mm) L1(mm)L2(mm) H2(mm) E (mm) nominal diameter (mm). See the parameter sheet for specifications
){kind=link}