After-sales Service: | Repairable Within The Warranty Period |
---|---|
Warranty: | 2 Years |
Function: | Heat Pressure Vessel |
Application: | Liquefied Gas |
Material: | Stainless Steel |
Pressure: | 1.6MPa≤p<10.0MPa |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
A fixed tube sheet heat exchanger is composed of tube sheets, shells, tube sheets, tubes, and other components. The overall structure is compact, with many tubes and a large area under the same diameter, making it relatively simple to manufacture. Its structural feature is that there is a tube bundle installed in the shell, with both ends of the tube bundle fixed to the tube plate through welding or expansion. The tube plates at both ends are directly welded to the shell, and the inlet and outlet pipes on the shell side are directly welded to the shell. The head flange of the outer edge of the tube plate is fastened with bolts, and the inlet and outlet pipes on the tube side are directly welded to the head. Several baffles are set inside the tube bundle according to the length of the heat exchange tube. The tube side of the heat exchanger can be divided into any number of channels through a diaphragm.
Fixed tube sheet heat exchangers have the advantages of simple structure, low manufacturing cost, convenient cleaning, multiple tube passes, double shell passes, and a wide range of specifications, and have been widely used in engineering. It is difficult to clean the shell side. Not suitable for dirty or corrosive media. If the expansion difference is large, we can install an expansion joint on the shell to reduce the thermal stress caused by the temperature difference on the shell side. It has the advantages of small bypass seepage, less use of forgings, low cost, no internal leakage, and a heat transfer product that is 20%~30% larger than that of floating head heat exchangers.
Suppliers with verified business licenses