| Customization: | Available |
|---|---|
| After-sales Service: | Repairable Within The Warranty Period |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical data and parameters
| Vessel part | Parameter values | ||
| Operating pressure MPa | 0.476~0.493 | ||
| Design pressure MPa | 0.931 | ||
| Test pressure during manufacturing MPa | hydraulic | 1.45 | |
| pneumatic | - | ||
| Operating temperature, °С | -10 ~ 40 | ||
| Design wall temperature, °С | 324 | ||
| Min allowable wall temperature of vessel, that is under design pressure , °С | -52 | ||
| Operating medium | MINERAL OIL | ||
| Operating medium data |
Class of danger | 4 | |
| Explosiveness | Yes | ||
| Fire hazard | Yes | ||
| Corrosion/erosion allowance during assigned lifetime, mm | 0 | ||
| Capacity,m3 | 0.28 | ||
| Empty vessel weight, kg | 260 | ||
| Max. weight of fluid filled*, kg | - | ||
| Assigned or estimated lifetime, years | 25 | ||
| Number of load cycles for the assigned or estimated lifetime | Max 1000 | ||
| Group of vessel as per table 1 of GOST R 34347-2017 | 1 | ||
| Work medium group as per TR CU 032/2013 | 1 | ||
| Equipment category as per TR CU 032/2013 | 1 | ||
| - for vessels with liquefied gases | |||
| Vessel part name (shell, head, grid, pipes, jacket etc.) | Q-ty, pcs. | Dimensions, mm | Material | |||
| Diameter internal or external | Wall thickness | Length (height) | Grade | Standard or technical requirements* | ||
| Shell of the inner vessel | 1 | O.D406 | 5 | 2079 | TP304L | ASME SA312/SA312M-2023 |
| Head | 2 | 1.D.394 | 6 (мин. 5) 6 (min. 5) |
50 | SA-240 Gr.304L | ASME SA-240M-2023 |
Applicable in the Russian Federation and the states having voted for approval of the interstate standard as mentioned in the foreword. |
||||||
| Item name | Dimensions (mm) or number as per specification |
Material | ||
| Grade | Standard or technical requirements* | |||
| Rib plate | 1 | 30X6 |
SA-240 304L |
ASME SA-240M-2023 |
| Vent pipr | 2 | DN 8 SCH STD |
SA-312 TP304L | ASME SA312/SA312M-2023 |
| Spiral-wound gasket | 2+4 | DN 100 ANSI 300# X4.5 THK. |
- | - |
| Heavy nut | 32+4 | 3/4"-10UNC-2B |
SA-194 Gr.4 |
- |
| Full thread stud | 16+2 | 3/4"-10UNC-2Ax125 |
SA-320 Gr.L7 |
- |
| Handle | 2 | Ø16 |
SS 304 |
- |
| Blind flange | 2 | DN 100 ANSI 300# |
SA-182 F304L |
- |
| Flange | 2 | DN 100 ANSI 300# SCH40S |
SA-182 F304L |
- |
| Pipe | 2 | DN 100 SCH40S L=85 |
SA-312 TP304L(SMLS |
ASME SA312/SA312M-2023 |
| Reinforcing pad | 2 | Ø210X5 THK |
SA-240 304L |
ASME SA-240M-2023 |
| Flange | 1 | DN 50 ANSI 150# B=50.8 Y=166 |
SA-182 F304L |
- |
| Flange | 1 | DN 50 ANSI 300# SCH80S |
SA-182 F304L |
- |
| Long radius elbow | 1 | DN 50 SCH80S 90EL |
SA-403 304L |
- |
| Pipe | 1 | DN 50 SCH80S L=230 |
SA-312 TP304L(SMLS) |
ASME SA312/SA312M-2023 |
| Flange | 1 | DN 20 ANSI 300# SCH80S |
SA-182 F304L |
- |
| Long radius elbow | 1 | DN 20 SCH80S 90EL |
SA-403 304L |
- |
| Pipe | 1 | DN 20 SCH80S L=204 |
SA-312 TP304L(SMLS) |
ASME SA312/SA312M-2023 |
| Pipe | 1 | DN 50 SCH80S L=96 |
SA-312 TP304L(SMLS) |
ASME SA312/SA312M-2023 |
| Flange | 1 | DN 50 ANSI 300# SCH80S |
SA-182 F304L |
- |
| Pipe | 1 | DN 50 SCH80S L=90 |
SA-312 TP304L(SMLS) |
ASME SA312/SA312M-2023 |
| Straight tee | 1 | DN 50 SCH80S T |
SA-403 304L |
- |
| Pipe | 1 | DN 50 SCH80S L=172 |
SA-312 TP304L(SMLS) |
ASME SA312/SA312M-2023 |
| Flange | 1 | DN 50 ANSI 150# SCH80S |
SA-182 F304L |
- |
| Earth lug | 2 | 100X80X8 THK. | SS 304 | ASME SA-240M-2023 |
| Pad | 2 | 285X160X5 THK. | SA-240 Gr.304 | ASME SA-240M-2023 |
| Rib plate | 4 | t=16 THK. | SA-240 Gr.304 | ASME SA-240M-2023 |
| Base plate | 2 | t=16 THK. | SA-240 Gr.304 | ASME SA-240M-2023 |
| Lifiting lug | 2 | t=16 THK. | SA-240 Gr.304 | ASME SA-240M-2023 |
| Nsulation support ring | 2 | t=6 | SA-240 Gr.304 | ASME SA-240M-2023 |
| Applicable in the Russian Federation and the states having voted for approval of the interstate standard as mentioned in the foreword. | ||||
){kind=link}